I have always wanted to choose a satisfactory and strong flashlight, but I don't know how to choose it. After buying those cheap ones and getting them, I found that they have no texture, and after using them for a short period of time, I will find that the lights become very dark and the power consumption is also very high. So let's let our professionals from Nightlight Brinyte explain the precautions for purchasing a strong flashlight!

Myth 1: Brightness is not always better

The first method to improve the brightness of a flashlight is to comprehensively improve its design from lamp holder to reflective bowl, battery, motherboard, etc. Both international and domestic branded products have undergone rigorous design and testing to ensure their service life and safety.

The second method is to remove the battery protection board and increase the voltage and current to achieve overclocking. So a flashlight priced around a hundred yuan was labeled with a lumen of 3000 or even higher, resulting in a huge heat output. Due to the mismatch between the two, frequent burning of the lamp holder and frequent over discharge of the lithium battery can occur. At times, it can only be lit for a few minutes and often requires maintenance, and at times, it can cause a fire due to the high heat output.

Myth 2: Misguided by false parameters

Many sellers intentionally or unintentionally falsely label the lumen value. Products that were originally only a few hundred lumens are forcibly labeled with 2000 or even higher, and in terms of power, there are often false labels such as 10W, 12W, or even higher, disregarding common sense. In terms of raw materials, it is even more ironic, and slogans with Chinese characteristics such as the world's brightest lamp caps imported from foreign countries are not uncommon.

Frequently Asked Questions

Q: Is a strong flashlight waterproof?

Answer: In general, a good strong flashlight will have a waterproof ring added at the interface. The outer material is aluminum alloy or similar. Basically waterproof. But it's not always possible to dive. The luminous Brinyte flashlight can withstand water ingress for up to two meters underwater, and the diving flashlight can operate normally for up to 200 meters underwater.

Q: How to use third gear lighting?

Answer: Press the switch once for strong light, press it again for weak light, and the third time for burst function. This type of switch is generally called a tactical switch.

Q: Do I need to charge before using it?

Answer: Use it first and wait for the flashlight to dim before charging for 3-5 hours. Lithium batteries are most afraid of over discharge, so please develop a habit of charging regularly.

Q: What should I do if the light bulb is broken?

Answer: The lifespan of the light bulb is 5W hours. If unfortunately it really breaks, it can be purchased in the electronic market. However, it is recommended to directly contact the manufacturer for repair, as there is usually a warranty period. Some flashlight manufacturers also provide first-class after-sales service, which is done very well by luminous technology.

Q: What is lithium battery over discharge?

Answer: If the brightness is significantly reduced and the battery continues to be used, it may cause damage to the battery. Even after professional activation, the battery level will significantly decrease. Therefore, please pay attention to battery maintenance and charge more if you have nothing to do.

Precautions for using strong flashlights

If not used for a long time, it is necessary to remove the battery to prevent damage to the flashlight, and do not expose it to the eyes of others, as it may cause damage to the eyes. Non professionals, please do not disassemble the flashlight to prevent damage to the circuit board.

Precautions for maintenance of strong flashlights:

Please perform routine maintenance on the flashlight during use to ensure that it can continuously provide you with high-quality service.

1: Please wipe the flashlight with a clean soft cloth after each use.

2: When the flashlight is contaminated with seawater or corrosive liquids, please clean it with clean water in a timely manner and blow dry it with a bit of hair dryer.

3: When the lamp cap and tail cover are not rotating smoothly, please apply a small amount of Vaseline (lubricant) to the interface.

4: When the flashlight is not in use, please remove the battery and store it in a cool place.